Cryogenic oxygen plant cost liquid oxygen plant
Product Advantages
- 1:The design principle of this plant is to ensure safety, energy saving and easy operation and maintenance. The technology is leading position in the world.
-
- A:Buyer needs lots of liquid production, so we supply middle pressure air recycle process to save the investment and power consumption.
- B:We adopts recycle air compressor and high, low tempt. expansion process to save power consumption.
- 2:It adopts DCS computer control technology to control main panel, local panel at the same time. This system can monitor the entire process of the plant.
Application Fields
Oxygen, nitrogen, argon and other rare gas produced by air separation unit are widely used in steel, chemical
industry,refinery,glass, rubber, electronics, healthcare, food, metals, power generation and other industries.
Product Specification
Air separation plant is based on the different boiling points of each components in the air. The air firstly is pressed, precooled, and got removal of H2O and CO2. After cooling in the medium pressure heat exchanger until reaching to the liquefaction temperature, it rectifies in the column to get liquid oxygen and liquid nitrogen.
This plant is molecular sieve purifying air with turbo expander process.
After being removed dust and mechanical impurity in the air filter, raw air goes to the air turbine compressor to press the air to 1.1MpaA, and cooled until 10℃ in the air precooling unit. Then it enters into alternate working molecular sieve absorber to remove the H2O,CO2,C2H2. The clean air is pressed by the expander and goes into the cold box. The presses air can be separated to 2 sections. After being cooled to 256K, one section is draw out to freezing unit 243K, then it is continuously cooled in the main heat exchanger. The cooled air will be draw out to the expander, and a part of expanded air goes into the main heat exchanger to reheat, then it gets out of the cold box. And the other parts go to the upper column. The other section is cooled by counter flow, and goes to the low column after being expanded.
After air being primarily rectified, we can get liquid air, waste liquid nitrogen and pure liquid nitrogen in the low column. Liquid air, waste liquid nitrogen and pure liquid nitrogen sucked from the low column go to upper column after being cooled liquid and pure liquid nitrogen cooler. After being rectified in the upper column, we can get 99.6% purity liquid oxygen in bottom of the upper column, it goes out as product. A part of nitrogen sucked from the top of the assist column goes out of the cold box as product.
Waste nitrogen sucked from the top of the upper column goes out of the cold box after being reheated by the cooler and main heat exchanger. Sucked part of it, it goes to molecular sieve purification system as the regenerative air source. Others are vented.
Process flow
1.Full low pressure positive flow expansion process
2.Full low pressure backflow expansion process
3.Full low pressure process with booster turboexpander
Construction in Progress
Workshop
Related products
-
Oxygen & Nitrogen Factory Project for Medi...
Product Advantages 1：Fully Automatic Rotary Air Compressor. 2：Very low power consumption. 3：Saving of water as air compressor is air cooled. 4：100% stainless steel construction column as per ASME standards. 5：High purity Oxygen for medical/hospital use. 6：Skid mounted version (No foundation required) 7：Quick start up and Shut down tim...
-
Liquid Oxygen and Nitrogen Production Plant/Liq...
Product Advantages We are known for our superb engineering expertise in fabricating liquid oxygen plants which are based on cryogenic distillation technology. Our precision designing makes our industrial gas systems reliable and efficient resulting in low operational costs. Being manufactured with high quality materials and components, our liquid o...
-
90%-99.9999% Purity and Large Capacity PSA Nitr...
Specification output (Nm³/h) Effective gas consumption (Nm³/h) air cleaning system Importers caliber ORN-5A 5 0.76 KJ-1 DN25 DN15 ORN-10A 10 1.73 KJ-2 DN25 DN15 ORN-20A 20 3.5 KJ-6 DN40 DN15 ORN-30A 30 5.3 KJ-6 DN40 DN25 ORN-40A 40 7 KJ-10 DN50 DN25 ORN-50A 50 8.6 KJ-10 DN50 DN25 ORN-60A 60 10.4 KJ-12 DN50 DN32 ORN-80A 80 13.7 KJ-20 DN65 DN40 ...
-
Industrial High Concentration Psa Oxygen Genera...
Specification Output (Nm³/h) Effective gas consumption (Nm³/h) air cleaning system ORO-5 5 1.25 KJ-1.2 ORO-10 10 2.5 KJ-3 ORO-20 20 5.0 KJ-6 ORO-40 40 10 KJ-10 ORO-60 60 15 KJ-15 ORO-80 80 20 KJ-20 ORO-100 100 25 KJ-30 ORO-150 150 38 KJ-40 ORO-200 200 50 KJ-50 PSA oxygen generator plant is fabricated using advanced Pressure Swing Adsorption technology. As is well-k...
-
Onsite nitrogen packing machine for food indust...
Specification output (Nm³/h) Effective gas consumption (Nm³/h) air cleaning system Importers caliber ORN-5A 5 0.76 KJ-1 DN25 DN15 ORN-10A 10 1.73 KJ-2 DN25 DN15 ORN-20A 20 3.5 KJ-6 DN40 DN15 ORN-30A 30 5.3 KJ-6 DN40 DN25 ORN-40A 40 7 KJ-10 DN50 DN25 ORN-50A 50 8.6 KJ-10 DN50 DN25 ORN-60A 60 10.4 KJ-12 DN50 DN32 ORN-80A 80 13.7 KJ-20 DN65 DN40 ...
-
Industrial Scale PSA Oxygen Concentrator Oxygen...
Specification Output (Nm³/h) Effective gas consumption (Nm³/h) air cleaning system ORO-5 5 1.25 KJ-1.2 ORO-10 10 2.5 KJ-3 ORO-20 20 5.0 KJ-6 ORO-40 40 10 KJ-10 ORO-60 60 15 KJ-15 ORO-80 80 20 KJ-20 ORO-100 100 25 KJ-30 ORO-150 150 38 KJ-40 ORO-200 200 50 KJ-50 We manufacture and export fully automatic oxygen plant and nitrogen plant for cylinder filling with the la...